Judul : Manual For Analysis & Design Using ETABS
link : Manual For Analysis & Design Using ETABS
Manual For Analysis & Design Using ETABS
Manual For Analysis & Design Using ETABS by Atkins | - | Structural Department, Atkins Dubai | 2007 | English | 46 p | pdf | 20.41 MB | The primary objective of this document is to make sure that ETABS is used consistently by the structural engineers in Atkins office in Dubai in terms of : modelling and analysis procedures; use of applicable built-in international codes; And complying with local authorities specific requirements;. This document is intended to complement the ETABS manuals and other relevant technical papers published by CSI. It is assumed that the user of this manual has a good command of ETABS and is familiar with the following codes : UBC 97 seismic provisions; ASCE 7 provisions for wind loading; BS codes of practice;.
Book Title
:
Manual For Analysis & Design
Using ETABS
Using ETABS
Authors
:
-
Publisher
:
Structural Department, Atkins Dubai
Year
:
2007
Language
:
English
Pages
:
46 p
File Format
:
pdf
File Size
:
20.41 MB
Objective
The primary objective of this document is to make sure that ETABS is used consistently by the structural engineers in Atkins office in Dubai in terms of :
- modelling and analysis procedures
- use of applicable built-in international codes
- And complying with local authorities specific requirements.
This document is intended to complement the ETABS manuals and other relevant technical papers published by CSI. It is assumed that the user of this manual has a good command of ETABS and is familiar with the following codes :
- UBC 97 seismic provisions
- ASCE 7 provisions for wind loading
- BS codes of practice.
Local Authority specific requirements are covered in Appendices at the end of this document.
The procedures in this document are based on standard practice in Dubai. However, for specific projects, some parameters or procedures need to be revised. This shall be done in accordance with the design statement and in conjunction with the project lead engineer.
Table of Contents
1. File Menu
1.1
Open a Pre-defined Template
1.2
Import Geometry
Import DXF file of architectural grid
Import DXF floor plan
Import DXF file of 3D model
2. Material properties
2.1
Concrete
Define Concrete grade
Define Concrete mass and weight per unit volume
Define Concrete modulus of Elasticity
2.2
Reinforcement
3. Definition & Sizing of Elements
3.1
Define Frame Elements
3.2
Define Shell Elements
3.3
Assign Frame or Shell section properties
3.4
Assign Frame section modifiers
3.5
Assign Shell section modifiers
3.6
Assign Pier / Spandrel Labels
3.7
Assign area object mesh options
3.8
Assign auto-line constraint
4. Supports
4.1
General Support Conditions
4.2
Modelling Piles as Supports (define spring stiffness values)
5. Loading
5.1
Dead Loads
Assign Self weight
Define Imposed dead load
5.2
Live Loads
5.3
Mechanical Loads
5.4
Wind Loads
Codified Method
ASCE 7 Method
BS 6399 Method
Extracting Wind Loads from Wind Tunnel Test Results
5.5
Earthquake Loads
Define Equivalent Static Force Method
Response Spectrum Analysis
Define Response Spectrum functions as per UBC 97 requirements
Define Response Spectrum cases and parameters
6. Load Combinations
6.1
Define Load combinations for Serviceability State
6.2
Define Load combinations for Ultimate State
6.3
Define Load combinations for Pile Design
7. Analysis Options
7.1
Dynamic analysis options (Ritz vs. Eigenvector)
7.2
P-Delta analysis options
For Local Authorities other than JAFZA
For JAFZA
8. Post-Analysis Checks
8.1
Analysis log & results
Warnings/div>
Global force balance
8.2
Deformed shape and modal animations
8.3
Modal characteristics (modal amplitude, mass participation ratio)
9. Reinforced Concrete Design Module
9.1
Shear Walls Design Module (BS 8110-97)
9.2
Reinforced Concrete Frame Design (BS 8110-97) Beams
Demikianlah Artikel Manual For Analysis & Design Using ETABS
Sekianlah artikel Manual For Analysis & Design Using ETABS kali ini, mudah-mudahan bisa memberi manfaat untuk anda semua. baiklah, sampai jumpa di postingan artikel lainnya.
Anda sekarang membaca artikel Manual For Analysis & Design Using ETABS dengan alamat link https://modularhomesoli.blogspot.com/2013/01/manual-for-analysis-design-using-etabs.html
0 Response to "Manual For Analysis & Design Using ETABS"
Posting Komentar